English Flag Germany Flag
Signalanoden Page Slideshow

Anodes Isolated Installation

anodes for the insulated installationThe magnesium anode is installed isolated. At this assembly the connection between anode and tank takes place through an easy accessible cable outside of the tank. Without opening the tank, it is possible to measure the protective current generated by the anodes and to check the consumption status of the anode from outside. A protective current of < 0,3 mA means the magnesium anode is worn out and needs to be exchanged.

Examples of anodes for isolated installation:

Tank size in litres
Dimension of MG-Anode
Order Model
30 - 50 l D21 x   210 mm M8 bolt
30 - 50 l  D26 x   130 mm M8 bolt
80 l D26 x   225 mm M8 bolt
80 l D21 x   310 mm M8 bolt
120 l D26 x   320 mm M8 bolt
150 - 200 l D21 x   500 mm M8 bolt
150 - 200 l D26 x   500 mm M8 bolt
150 - 200 l D33 x   500 mm M8 bolt
200 l D21 x   700 mm M8 bolt
200 - 300 l D33 x   700 mm M8 bolt
500 l D33 x   800 mm M8 bolt
1000 l D33 x 1000 mm M8 bolt
1500 l D33 x 1500 mm M8 bolt
1500 l D33 x 1800 mm M8 bolt
The anodes for the isolated installation can be ordered optionally with a M8 bolt, with a screw connection or adapter G ¾“, G1“, G 1 ¼“, G 1 ½“.

All anodes for the isolated installation will be delivered with nuts, seal, washer, lamellar disc, ground cable and insulation piece.